$100.99

The BLACK+DECKER LE750 is a 12 amp corded edger and trencher with a 7.5 in hardened steel blade, three depth settings to 1.5 in, and a three wheel chassis that rolls instead of hovers.

Category:

Description

Most lawns do not fail in the middle. They fail at the border, where turf creeps over the sidewalk in shaggy tongues and the driveway edge disappears a little more every month. The black+decker le750 is the tool most American suburbs reach for to take that border back.

Its 12 amp high torque motor drives a 7.5 in hardened steel blade at 4,700 RPM, with 150 in-lb of torque behind it, and three positive depth settings let you cut at 1, 1.25 or 1.5 in. It rolls on a three wheel chassis at 12.4 lb, so the machine carries its own weight while you steer. For a typical home lawn with a driveway, sidewalks and a patio, this is the default answer: plug in, set the depth, and walk a clean line.

Key Features

12 amp high torque motor

The motor is rated at 150 in-lb of torque and spins the blade at 4,700 RPM. In practice that means it does not stall in thick turf or damp soil the way small cordless edgers can, and it holds its speed through a first re-cut on an edge that has been neglected for a season.

Three depth positions to 1.5 in

Positive stops at 1, 1.25 and 1.5 in make depth a deliberate choice rather than a guess. Shallow settings suit weekly maintenance; the full 1.5 in cut is deep enough for a proper spring re-cut that severs runners and holds the line for weeks.

Pull-up edge guide converts to a trencher

Lift the edge guide and the same tool cuts a landscape trench. Owners use it for bed lines, for burying low voltage lighting cable, and for setting the slot that plastic or metal bed edging drops into.

Three wheel chassis and opening guard door

Three wheels keep the blade tracking straight along pavement without the balancing act of a two wheel tool. The guard door opens for cleaning, which matters after a wet week when packed soil would otherwise choke the blade housing.

Tool free assembly, either-side assist handle

The edger assembles without tools, the assist handle fits on either side for left or right handed users, and a built in cord retainer keeps the extension cord connection from pulling apart mid-run.

Product Description

The BLACK+DECKER LE750 is a corded walk-behind edger and trencher for home lawns. A vertical steel blade cuts the turf face where lawn meets hardscape, and the wheeled chassis rides along the pavement edge so the cut stays straight over long runs. BLACK+DECKER has sold versions of this design for decades, and the current model keeps the formula simple: one motor speed, three depths, two jobs.

Owner feedback on this model repeats two themes. The first is reliability: it is the edger people buy once and keep, because there is little on it to wear out beyond the blade. The second is honest about the trade-offs: the guard and wheels are plastic where pricier tools use metal, and being corded means your range is the length of your extension cord. Neither point stops it being the most recommended home edger in its class.

Benefits of Using This Product

  • Real torque for re-cutting neglected edges, not just maintaining clean ones
  • Three positive depth stops, so the cut depth you choose is the depth you get
  • Trencher mode covers bed lines and low voltage cable in the same tool
  • Three wheels track straight along pavement with very little practice
  • No batteries to charge, no fuel to mix: it works the moment you plug in

Specifications

Motor 12 amp, high torque, 150 in-lb
Blade speed 4,700 RPM
Blade 7.5 in hardened steel
Depth settings 3 positions: 1, 1.25 and 1.5 in
Weight 12.4 lb
Chassis Three wheel, pull-up edge guide
Extra modes Landscape trencher via pull-up edge guide
Assembly Tool free
Warranty 2 years

How to Use

Mow first, then edge while the soil is moist but not wet, ideally a day after rain. Set the depth to 1.5 in for a first re-cut or 1 in for maintenance. Hold the blade a finger’s width off the pavement, start the motor before the blade meets the turf, and walk slowly, looking a few feet ahead rather than down at the blade. On a long-neglected edge, take a shallow clearing pass first, lift out the turf strip, then cut to full depth. Open the guard door and clear packed soil when you finish, and coil the cord so the retainer is not strained in storage.

Why Choose the BLACK+DECKER LE750?

Choose the black+decker le750 when you want one proven corded edger that handles both the weekly line and the spring rescue job. Cordless tools are lighter and gas tools are stronger, but neither matches the combination here: full torque at any moment, no runtime ceiling, a trencher in the same body, and a price that undercuts most dedicated cordless kits. For the typical suburban lot, it is the sensible first edger and, for many owners, the only one they ever buy.

Frequently Asked Questions

How deep can the LE750 cut?

Up to 1.5 in, across three positive settings at 1, 1.25 and 1.5 in. That is deep enough for a full spring re-cut on most home lawns.

Does it really work as a trencher?

Yes, for shallow landscape trenching. The pull-up edge guide converts it for cutting bed lines and slots for low voltage cable or bed edging. It is not a substitute for a deep trenching machine.

What size extension cord does it need?

Use an outdoor rated cord sized for a 12 amp load: 16 gauge is fine to about 50 ft, and step up to 14 or 12 gauge for 100 ft runs so the motor gets full voltage.

Is the blade replaceable?

Yes. The 7.5 in blade is a standard service part. Replace it when the cut starts to tear rather than slice, or when the edge has worn visibly thin.

Final Verdict

The BLACK+DECKER LE750 earns its place as the most home lawns pick by getting the fundamentals right: enough torque to re-cut, enough depth to matter, wheels that keep the line straight, and a trencher mode that earns its keep twice a year. The cord is the price of admission. If your edges sit within reach of an outlet, this is the edger to buy first.

Black+Decker LE750: Care and Storage

A black+decker le750 stays sharp with simple habits: brush soil off the 7.5 inch blade after each use, check the blade edge each spring, and store the machine dry so the hardened steel does not rust. The black+decker le750 rolls on a three wheel chassis, so a quick wipe of the wheel axles keeps it tracking straight along drives. Cared for that way, a black+decker le750 keeps cutting and trenching cleanly for many seasons.

Q: How deep can the black+decker le750 cut?

A: The black+decker le750 offers three depth settings down to about 1.5 inches, enough for crisp lawn edges and shallow trenching for bed lines or cable.

Still deciding? Our guide to the best lawn edger for clean lines compares all ten models on cutting depth, blade, weight and ease of use, with an honest Best for and Not ideal for for each one.

Last Update: October 11, 2026